The s/n will appear on the gun in other places, but the prefix may not be on those other places.
You can look at the inside of the right grip panel to see what is stamped there (assuming the grips are original). Also, push the extractor star all the way out, as if you are ejecting spent shells, and look at the underside surface of the star, there should be a number there.
The problem with these later guns is that they may have the prefix imbedded within the s/n (example 5D12345), is that in the places - other than the butt - you may see these number show us as 512345, especially the grips, they normally didn't stamp the alpha letter, either as a prefix or imbedded number.
The older the gun, the possiblity exists for the s/n to appear in more places, for instance on the underside of the barrel (the flat area that is covered from view if the cylinder is closed, swing out the cylinder and look there, I doubt this gun has it there, it appears too late), also check the crane, on the surface that faces the cylinder, you may need to look through the cylinder with a flashlight to see it, or dissassembly may be required.
Good luck
- S&w Model 651 For Sale
- Smith And Wesson Model 51 Serial Numbers Identification
- Smith And Wesson Model 51 Serial Numbers For Sale
- Smith And Wesson Model 51 Serial Numbers Lookup Free
- Smith And Wesson Revolvers
S&w Model 651 For Sale
- The Victory Model Smith and Wesson.38 Caliber Revolver. The Victory model was so named for the 'V' prefix which was placed before the serial number and represented 'Victory' against the Axis powers in World War II. Serial numbers for the.38 special Victory model began at about V1 in early 1942 and ran until VS811119 with a date of late.
- During 1969 the Hi-Power pistol Serial Number code was changed to a two digit year and 'C' prefix. Serial Numbers for “T” prefix Hi-Power pistols exceeded T300000 and were shipped into 1970. # PreFiX COde 1969 69C prefix before Ser. 1970 70C prefix before Ser. 1971 196471C prefix before Ser. 1972 72C prefix before Ser.
| Smith & Wesson Model 57 | |
|---|---|
| Type | Revolver |
| Place of origin | United States |
| Production history | |
| Manufacturer | Smith & Wesson |
| Produced | 1964–1991, 2008–present |
| Variants | See variants |
| Specifications | |
| Mass | 48 oz (6″ bbl) |
| Barrel length |
|
| Cartridge | .41 Magnum |
| Action | Double-action |
| Feed system | 6-round cylinder |
| Sights | Red insert front; adjustable rear |
The Smith & Wesson Model 57 is a large frame, double-actionrevolver with a six roundcylinder, chambered for the .41 Magnumcartridge, and designed and manufactured by the Smith & Wessonfirearmscompany. The gun was designed as a weapon for law enforcement agencies. However, due to size and recoil it found more favor with civilian target shooters and hunters.
Development[edit]
Smith And Wesson Model 51 Serial Numbers Identification
SMITH & WESSON MODEL 51 22 MAGNUM REVOLVER (EXTRA 22LR CYLINDER) SMITH & WESSON MODEL 51 22 MAGNUM REVOLVER (EXTRA 22LR CYLINDER) Click Photo to Enlarge. Guns International #: 101505697. Seller's Inventory #: 21956. Category - Smith & Wesson Revolvers - Model 51 - Smith & Wesson Revolvers - Rimfire. Smith & Wesson Revolvers - Model 51.
In the early 1960s, Elmer Keith, Bill Jordan, and Skeeter Skelton, all noted firearms authorities and authors, lobbiedRemington Arms and Smith & Wesson to introduce a new .41 caliber police cartridge with the objective of filling a perceived ballistic performance gap between the .357 and .44 Magnums, thus creating a chambering which they believed would be the ultimate for law enforcement purposes.[1]In April 1964 Remington responded by introducing the .41 Magnum cartridge, and in concert, Smith & Wesson launched the Model 57 revolver chambered for the new ammunition.[1]Elmer Keith originally proposed the name '.41 Police' for the new cartridge, but Remington instead chose .41 Magnum, hoping to capitalize on the notoriety and popularity of its earlier Magnum offerings.[1]
Features[edit]
First introduced in April 1964, the Model 57 was produced with 4', 6', 6-1/2', and 8-3/8' barrels in both highly polishedblued and nickel–plated finishes. Using the S&W large 'N' frame, the Model 57 was one of the companies’ premier products, offering superb fit and finish, basically the same pistol as the famous S&W Model 29, except in .41 instead of .44 caliber.[2] Like the Model 29, the 57 sported a red insert front sight with a white outlineadjustablerear ironopen sight, as well as a targettrigger, target hammer, and oversized woodentarget grips.[2]
Model 57 variants[edit]
| Model | Year | Modifications |
|---|---|---|
| 57 | 1964 | Introduction |
| 57-1 | 1982 | Eliminate cylinder counterbore and pinned barrel, change in cylinder length to 1.67″ |
| 57-1 | 1986 | Nickel finish discontinued |
| 57-2 | 1988 | New yoke retention system, radius stud, floating hand |
| 57-3 | 1990 | Longer stop notch in cylinder |
| 57-3 | 1992 | 4″ barrel discontinued, blueish hue finish only |
| 57-4 | 1993 | New rear sight leaf, drilled and tapped frame |
| 57-4 | 1993 | Discontinued |
| 57-5 | 2019 | Reintroduced 6″ in carbon steel |
Smith And Wesson Model 51 Serial Numbers For Sale
Ammunition[edit]
Remington originally offered two ammunition loadings in its .41 Magnum cartridge lineup. The first was a full-power 1300-1400 ft/s hunting or heavy-usage load using a jacketed soft point bullet which rivaled the stopping power of the mighty .44 Magnum while boasting less recoil and a flatter bullettrajectory. The second loading was a less powerful 1,150 ft/s 210 grain leadsemiwadcutter intended for law enforcement usage.[1][3]
Market response[edit]
Due to a number of factors the .41 Magnum unfortunately never became the 'next great police loading' that its developers and supporters envisioned.[1] First, the majority of departments and rank and file officers were perfectly content with their traditional .38 Special revolvers, and if more stopping power was needed, cartridges such as the popular .357 Magnum were available.[2] In addition, when senior police officials could be convinced to evaluate the .41 Magnum, many complained that even the lighter .41 Magnum 'Police load' was unpleasant to fire, while the .357 Magnum offered adequate performance without the bruising recoil and muzzle blast associated with the .41.[1][3] Also, the marketing decision by S&W and Remington to dub the cartridge a 'Magnum' ended up working against them in their desire to address the law enforcement market. Police organizations found the connotation of a high-powered 'Magnum' hunting-type weapon to be unpalatable in an era when they were struggling with political correctness and pursued positive public relations to offset any possible public perception of police brutality.[4] Although the .41 Magnum was adopted as a police departmental standard by a few cities such as Amarillo and San Antonio TX, and San Francisco, CA, most chose to pass.[1] In addition, introduced in the shadow of its limelight-grabbing 'big brother' the .44 Magnum Model 29, the Model 57 struggled from its onset to garner much market share. The .41 Magnum's bullet (at 0.410″) is only 0.019″ smaller than the destined-for-greatness .44 Magnum (at 0.429″). The popularity gap widened further when Clint Eastwood used a 'most powerful handgun in the world' Model 29 in the popular film Dirty Harry. In the aftermath of the film's release, many contemporaries of the .44 Magnum, including the .41, somewhat fell out of favor with the general public and American firearms market.[2] Finally, a series of hugely popular and successful lighter and smaller-framed revolvers crafted from stainless steel emerged in the mid 1980s. These police-issue oriented firearms, exemplified by models such as the S&W Model 66, accelerated the Model 57's demise. Overall, the Model 57 and its variants failed to generate the interest (or sales) which had been hoped for.[1]
Variants[edit]
Smith And Wesson Model 51 Serial Numbers Lookup Free
Smith & Wesson offered an all stainless steel version of the Model 57 as the Model 657.[5] The Model 657 was introduced in 1986.[6]
A very rare 5' model 57 was[7] produced in the custom shop. All known examples included the traditional short underlug/ejector shroud.
Smith & Wesson Model 58[edit]
Smith And Wesson Revolvers
On July 10, 1964, S&W introduced a more basic and inexpensive .41 Magnum intended for procurement by police departments. This budget version of the Model 57 was similar in principle of design to the .38 Special S&W heavy-barrel Model 10, or .357 Magnum Model 28 Highway Patrolman. Weighing in at 41 ounces, the Model 58 featured a 4' barrel, fixed iron open sights, and simpler standard 'magna service' grips.[1][3] Finish options were the same as its upscale Model 57 brethren, blued and nickel, but shortly after the Model 58's introduction S&W decided a less expensive 'matte' bluing treatment would be more appropriate for the basic 'workingman' model. The no-frills Model 58 also lacked an ejection rod shroud, but retained the pinned barrel and counter bored cylinder of the more expensive Model 57. The Model 58 was manufactured from 1964 to 1977 and roughly 20,000 were produced. In 2008, it was released again by S&W, both in bright nickel and bright blue finish.[3]
References[edit]
- ^ abcdefghi“Smith & Wesson’s .41 Magnum”Archived 2008-08-20 at the Wayback Machine, Free Patriot Web site. Accessed August 5, 2008.
- ^ abcd“S&W Model 57”, Notpurfect Web site. Accessed August 5, 2008.
- ^ abcdMiller, Payton. “Smith & Wesson Model 58”Archived 2008-06-19 at the Wayback Machine, Guns and Ammo magazine Web site. Accessed August 5, 2008.
- ^'The .41 Mag: if only we could do it over', Guns, April 2005. Accessed August 5, 2008.
- ^Boorman, Dean K. (2002). The History of Smith & Wesson Firearms. Globe Pequot Press. p. 86. ISBN978-1-58574-721-4. Retrieved 31 July 2013.
- ^Supica, Jim; Nahas, Richard (2006). Standard Catalog of Smith & Wesson. Iola, Wisconsin: Gun Digest Books. p. 268. ISBN978-1-4402-2700-4. Retrieved 31 July 2013.
- ^44, Doc. 'Model 57, Rare 5-inch Barrel, A 'Tool Room' Job'. The Smith & Wesson Forum. http://smith-wessonforum.com/.External link in
|publisher=(help)CS1 maint: numeric names: authors list (link)